Anker

SOLIX V1

Name: SOLIX V1
Brand: Anker
Price: 1299 AUD
Availability: InStock

A 22 kW three-phase V1 with a 7 m tethered cable; solar charging and home load balancing require compatible site metering or supported Anker X1 integration.

Estimated charger price

around $1,300

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Australian Anker SOLIX V1 22 kW cable version is a three-phase charger with a 7 m tethered charging lead. It is rated IP65/IK10 and operates from -30°C to 50°C. Wi-Fi and Bluetooth support connected charging controls. Solar charging and home load balancing require a compatible Anker SOLIX Smart Meter, supported Shelly meter or supported Anker SOLIX X1 integration. The charger includes temperature monitoring plus Type A and 6 mA DC leakage detection. South Australia's registered-equipment list records the three-phase Anker SOLIX V1 as OCPP 1.6 equipment.

Key highlights

22 kW three-phase configuration

7 m tethered charging cable

IP65 / IK10

-30°C to 50°C operating range

Wi-Fi and Bluetooth

Solar charging with compatible smart meter or Anker X1 integration

Load balancing with compatible smart meter or Anker X1 integration

Type A + 6 mA DC leakage detection

OCPP 1.6 registered for the Australian three-phase model

3-year warranty

Best for

Three-phase homes where the EV can accept higher AC charging rates
Drivers who benefit from a 7 m tethered cable
Solar homes able to install compatible Anker or Shelly metering
Homes using or planning a supported Anker SOLIX X1 system

Not ideal for

— Single-phase homes expecting 22 kW charging
— Solar households wanting surplus charging without compatible metering or X1 integration
— Homes wanting dynamic load balancing without site energy measurement
— Buyers looking for a basic charger without connected energy-management functions

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power22 kW

PhaseThree-phase

Cable7 m tethered Type 2

Weather ratingIP65 / IK10

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingRequires compatible Anker or Shelly metering, or supported Anker X1 integration

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.