HomeChargerMatch

Autel

MaxiCharger AC

A 22 kW three-phase tethered wallbox with OCPP 1.6, app control and Adaptive Load Management; native surplus-solar charging is not documented for this exact model.

Estimated charger price

around $1,500

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Autel MaxiCharger AC

Overview

The Australian Maxi EU AC W22-C5 is a 22 kW / 32 A three-phase MaxiCharger AC Wallbox with a 5 m tethered Type 2 cable. South Australia's registered-equipment list records the W22-C5 family as OCPP 1.6 equipment and three-phase. The cable model is rated IP65/IK08 and has a documented operating range of -40°C to 55°C. Connectivity includes Wi-Fi, Bluetooth, Ethernet, optional 4G and RS485. Autel documents Adaptive Load Management for the AC Wallbox. Current documentation for this exact AC Wallbox does not document a native surplus-solar charging mode.

Key highlights

22 kW / 32 A three-phase

5 m tethered Type 2 cable

IP65 / IK08

OCPP 1.6 for the Australian W22 family

Wi-Fi, Bluetooth and Ethernet

Optional 4G

RS485 for energy-meter communication

Adaptive Load Management

AC 30 mA + DC 6 mA residual-current detection

3-year warranty

Best for

  • Three-phase homes where the EV can accept higher AC charging rates
  • Installations requiring OCPP 1.6
  • Sites wanting app-based charging controls and RFID access
  • Installations where Adaptive Load Management will be correctly configured

Not ideal for

  • — Single-phase homes expecting 22 kW charging
  • — Solar households specifically requiring a documented native surplus-solar mode
  • — Buyers seeking battery-health diagnostic functions from the wall charger

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500
Power22 kW
PhaseThree-phase
Cable5 m tethered Type 2
Weather ratingIP65 / IK08
Warranty3 years
Solar supportSurplus solar
OCPPYes
Load balancingAdaptive Load Management supported; site metering and control requirements depend on configuration
App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.

Find the right charger for your home

Tell us about your EV, home and charging needs.

FIND MY CHARGER →

Retailer and installer quote options are planned for a future release. For now, use manufacturer resources above to explore purchase options.

You might also consider

myenergi

Zappi 7.4kW

Solar-aware eco charging for Aussie homes

7.4 kW

from $1,545

3-yr warranty

Solar CompatibleLoad BalancingOCPPType 2
View details →

Evnex

E2 Plus 7.4kW

NZ-built smart charger with OCPP support

7.4 kW

from $1,399

4-yr warranty

Solar CompatibleLoad BalancingOCPPType 2
View details →