EVOS

Fleet22

Name: Fleet22
Brand: EVOS
Price: 1699 AUD
Availability: InStock

An Australian-made charger for single- or three-phase installations, with up to 22 kW output, OCPP 1.6J, MyEVOS control and optional metered solar and energy-management functions.

Estimated charger price

around $1,700

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The EVOS Fleet22 FAC22-001 can be installed on single-phase or three-phase supply, delivering up to 7.4 kW single-phase or 22 kW three-phase at 32 A per phase. The current Type 2 configuration uses a 5 m tethered cable and is rated IP65/IK10, with operation from -25°C to 55°C. Connectivity includes Wi-Fi, Bluetooth and Ethernet with optional 4G, and OCPP 1.6J is supported. The MyEVOS platform provides connected charging control. EVOS Solar Match and Solar Export require compatible current metering and communications hardware, while broader dynamic energy management is provided through the EVOS energy-management architecture. The charger includes 6 mA DC residual-current detection and requires an upstream Type A RCD and MCB.

Key highlights

Up to 7.4 kW single-phase / 22 kW three-phase

32 A maximum per phase

5 m tethered Type 2 cable

IP65 / IK10

-25°C to 55°C operating range

Wi-Fi, Bluetooth and Ethernet

Optional 4G

OCPP 1.6J

MyEVOS connected control

Metered Solar Match and Solar Export options

Dynamic energy-management options

Built-in 6 mA DC residual-current detection

External Type A RCD and MCB required

3-year manufacturer warranty

Best for

Australian homes or workplaces wanting locally manufactured charging hardware
Single- or three-phase installations needing up to 22 kW capability
Sites requiring OCPP 1.6J
Solar homes able to install the required EVOS current metering and communications hardware
Sites planning EVOS dynamic energy management

Not ideal for

— Solar households expecting automatic solar charging without additional metering and communications hardware
— Homes expecting dynamic energy management from the charger alone
— Buyers requiring a verified HCM depth value for compact-install scoring

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.4 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

Cable5 m tethered Type 2 standard

Weather ratingIP65 / IK10

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingSolar and dynamic energy management require compatible EVOS metering and communications hardware

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.