Fox ESS

Fox ESS A Series 7.3kW

Name: Fox ESS A Series 7.3kW
Brand: Fox ESS
Price: 850 AUD
Availability: InStock

A 7.3 kW single-phase Fox ESS A Series charger with a 6 m tethered cable, OCPP support and meter-dependent solar and load-management functions.

Estimated charger price

around $850

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Fox ESS A7300P1-E-B is a 7.3 kW / 32 A single-phase charger operating from a 230 V supply. The tethered version uses a 6 m Type 2 cable and has an IP65 charger body with IK08 impact protection. Connectivity includes Bluetooth, Wi-Fi and Ethernet, with optional 4G, plus RFID and app-based charging control. Fox ESS documents OCPP 1.6 JSON or OCPP 2.0.1. Dynamic load balancing requires compatible site current measurement and commissioning. Fox documents SDM120CT or DDSU666 metering arrangements for the 7.3 kW charger. Solar PV Linkage requires compatible Fox ESS inverter and meter data and provides Green and Economic charging modes.

Key highlights

7.3 kW / 32 A single-phase

230 V AC

6 m tethered Type 2 cable

190 x 320 x 130 mm

IP65 charger body / IK08

-30°C to 50°C operating range

Bluetooth, Wi-Fi and Ethernet

Optional 4G

RFID and app control

OCPP 1.6 JSON or OCPP 2.0.1

Dynamic load balancing with compatible CT or meter measurement

Green and Economic solar charging modes with compatible Fox ESS inverter and metering

Internal AC 30 mA + DC 6 mA residual-current detection

External RCCB required

3-year Australian warranty

Best for

Single-phase homes needing up to 7.3 kW charging
Homes using compatible Fox ESS solar equipment
Installations requiring OCPP connectivity
Sites able to install compatible CT or meter-based load measurement
Drivers who want a 6 m tethered Type 2 cable

Not ideal for

— Homes requiring three-phase charging
— Solar households expecting surplus charging without compatible Fox ESS inverter and meter data
— Homes expecting dynamic load balancing without compatible current measurement
— Buyers interpreting ISO 15118 hardware readiness as currently active Australian V2H or V2G

Using this charger at home in Australia

On a suitable installation, this charger can provide up to 7.3 kW. Actual charging speed also depends on the vehicle's onboard AC charging limit and the configured site capacity.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power7.3 kW

PhaseSingle-phase

Cable6 m tethered Type 2

Weather ratingIP65 charger body / IK08

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingRequires compatible Fox ESS CT or meter measurement and commissioning

App control—

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.