Fronius

Fronius Wattpilot Flex Home 22 C6

Name: Fronius Wattpilot Flex Home 22 C6
Brand: Fronius
Price: 1900 AUD
Availability: InStock

A 6 m tethered Fronius charger with automatic one-/three-phase switching, dynamic PV-surplus charging, OCPP 1.6J and meter-dependent Dynamic Load Balancing.

Estimated charger price

around $1,900

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Fronius Wattpilot Flex Home 22 C6 supports up to 7.36 kW single-phase or 22 kW three-phase charging at 6-32 A. It has a 6 m tethered Type 2 cable, LAN and Wi-Fi connectivity, RFID, OCPP 1.6J and IP66/IK08 protection. Dynamic PV-surplus charging operates from 1.38 kW to 22 kW using automatic one-/three-phase switching, but compatible metering or Fronius energy-system components are required. Dynamic Load Balancing requires a Fronius Smart Meter IP, a compatible Fronius inverter with Fronius Smart Meter, or a Datamanager Box 2.0 with Fronius Smart Meter at the feed-in point. The charger incorporates 20 mA AC and 6 mA DC residual-current detection, while additional upstream residual-current and overcurrent protection are required.

Key highlights

Up to 7.36 kW single-phase / 22 kW three-phase

6-32 A configurable charging current

6 m tethered Type 2 cable

IP66 / IK08

-25°C to 45°C operating range

LAN and Wi-Fi

RFID

OCPP 1.6J

Dynamic PV-surplus charging from 1.38-22 kW

Automatic one-/three-phase switching

Dynamic Load Balancing with compatible Fronius metering

Integrated 20 mA AC + 6 mA DC residual-current detection

Additional upstream RCD and circuit breaker required

3-year warranty

Best for

Homes wanting Fronius-integrated surplus-solar charging
Single- or three-phase installations needing automatic phase switching
Homes able to install the required compatible Fronius metering
Users wanting a 6 m tethered Type 2 charger
Installations requiring OCPP 1.6J

Not ideal for

— Solar households expecting PV optimisation without the required metering or system components
— Homes wanting Dynamic Load Balancing without compatible Fronius metering
— Buyers preferring an untethered Type 2 socket
— Buyers interpreting ISO 15118 hardware preparation as active V2H or V2G capability

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP66 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.36 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

Cable6 m tethered Type 2

Weather ratingIP66 / IK08

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingDynamic Load Balancing requires compatible Fronius metering at the feed-in point

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.