Growatt

THOR

Name: THOR
Brand: Growatt
Price: 950 AUD
Availability: InStock

A 22 kW three-phase THOR with a 5 m tethered Type 2 cable, OCPP 1.6, PV Linkage solar charging and CT- or meter-based load balancing.

Estimated charger price

around $1,200

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Growatt THOR 22AS-P-V1 is a 22 kW / 32 A, 400 V three-phase charger with a fixed 5 m Type 2 cable. It is rated IP65 and supports LAN, Wi-Fi and optional 4G connectivity, app and RFID activation, OCPP 1.6, PV Linkage solar charging and smart load balancing. Growatt documents Type A residual-current protection plus 6 mA DC fault-current detection. PV Linkage adjusts charging around available surplus solar. Growatt states that load balancing monitors incoming household power using a CT or meter so charging can be adjusted around site demand. Current THOR 11/22AS-P/S-V1 documentation specifies an operating range of -25°C to 50°C.

Key highlights

22 kW / 32 A three-phase

400 V AC

5 m tethered Type 2 cable

IP65 enclosure

-25°C to 50°C operating range

OCPP 1.6

PV Linkage surplus-solar charging

Smart load balancing using CT or meter data

LAN, Wi-Fi and optional 4G

App, RFID and plug-and-charge activation

Type A residual-current protection + 6 mA DC fault-current detection

3-year warranty

Best for

Three-phase homes where the EV can accept higher AC charging rates
Solar households wanting PV Linkage surplus charging
Sites requiring OCPP 1.6
Homes able to install the required CT or meter-based site measurement for load management

Not ideal for

— Single-phase homes expecting 22 kW charging
— Installations where CT or meter-based site measurement cannot be fitted
— Buyers expecting PV Linkage or load balancing to operate without correct system commissioning

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power22 kW

PhaseThree-phase

Cable5 m tethered Type 2

Weather ratingIP65

Warranty3 years

Solar supportSurplus solar

OCPP—

Load balancingSmart load balancing requires CT or meter-based site measurement

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.