myenergi

Zappi v2.1

Name: Zappi v2.1
Brand: myenergi
Price: 1895 AUD
Availability: InStock

The current Australian zappi multiphase supports up to 7.4 kW single-phase or 22 kW three-phase charging, with CT-based solar charging and site load management.

Estimated charger price

around $1,550

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The current Australian zappi multiphase can be used on single- or three-phase installations, with up to 7.4 kW available on single-phase and 22 kW on suitable three-phase installations. Tethered versions use a 6.5 m Type 2 cable, while untethered Type 2 socket versions are also available. FAST, ECO and ECO+ modes use grid CT measurement to coordinate charging with household demand and available renewable generation. myenergi supplies one CT for a single-phase installation and three CTs for the three-phase version. Compatible Wi-Fi-equipped zappi models support OCPP 1.6J through myenergi's cloud-hosted OCPP service rather than a direct local OCPP connection.

Key highlights

Up to 7.4 kW single-phase / 22 kW three-phase

6.5 m tethered Type 2 or Type 2 socket

FAST, ECO and ECO+ charging modes

CT-based solar-surplus charging

Grid and supply load management

One CT supplied for single-phase; three CTs supplied for three-phase

IP65 enclosure

OCPP 1.6J on compatible Wi-Fi models via myenergi's cloud service

3-year warranty

Best for

Homes wanting CT-based surplus-solar charging
Properties that may use single- or three-phase charging
Homes needing configurable grid or supply load limits
Users wanting a tethered cable or Type 2 socket option

Not ideal for

— Buyers looking for a basic charger without solar or energy-management functions
— Sites regularly exceeding the documented 40°C maximum operating temperature
— Installations where the required grid CT measurement cannot be fitted
— Installations requiring a direct local OCPP endpoint rather than myenergi's cloud-hosted OCPP service

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.4 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

Cable6.5 m tethered Type 2 or Type 2 socket

Weather ratingIP65

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingYes; grid CT measurement required, with CTs supplied for the selected installation

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.