Raedian

NEO 22kW

Name: NEO 22kW
Brand: Raedian
Price: 1099 AUD
Availability: InStock

A configurable NEO platform supporting up to 7.4 kW single-phase or 22 kW three-phase, with OCPP and measured load management; three-phase solar charging requires the optional Solar Charge Kit.

Estimated charger price

around $1,100 base

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Raedian NEO 22 kW platform supports up to 7.4 kW on single-phase supply or 22 kW on suitable three-phase supply. This HCM record represents the base 5 m tethered Type 2 configuration. The charger supports app and RFID control, OCPP 1.6 and dynamic load management using site-current measurement. For the Australian three-phase NEO, solar charging requires the compatible Solar Charge Kit and associated energy measurement rather than being a standalone charger-only function. The charging core is rated IP55/IK10 and the product carries a 3-year manufacturer warranty.

Key highlights

Up to 7.4 kW single-phase / 22 kW three-phase

5 m tethered Type 2 base configuration

IP55 / IK10

Wi-Fi and Bluetooth app connectivity

OCPP 1.6

RFID access

Dynamic load management using site measurement

Optional Solar Charge Kit for measured three-phase solar charging

Integrated 6 mA DC residual-current detection

External Type A RCD required

3-year manufacturer warranty

Best for

Single- or three-phase homes wanting one configurable charger platform
Installations requiring OCPP 1.6
Homes able to use measured dynamic load management
Solar households prepared to add the required Solar Charge Kit

Not ideal for

— Buyers expecting solar charging to be included in the base three-phase charger price
— Sites where the required load or solar energy measurement cannot be installed
— Buyers requiring immediate Australian stock availability without checking the distributor

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP55 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.4 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

Cable5 m tethered Type 2

Weather ratingIP55 / IK10

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingDynamic load management requires site measurement; solar charging requires the compatible Solar Charge Kit

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.