Schneider

Schneider Charge

Name: Schneider Charge
Brand: Schneider
Price: 1500 AUD
Availability: InStock

A socketed home charger supporting 7.4 kW single-phase or 11/22 kW three-phase charging, with OCPP 1.6, Wiser Home control and optional Schneider anti-tripping.

Estimated charger price

around $1,600

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Schneider Charge EVH5A22N2S uses a shuttered Type 2 socket and can be configured for 7.4 kW / 32 A single-phase, 11 kW / 16 A three-phase or 22 kW / 32 A three-phase operation. It is rated IP55/IK10 and supports Wi-Fi, Ethernet, Wiser Home control and OCPP 1.6. The charger incorporates 6 mA DC leakage protection. Schneider's installation documentation for 22 kW specifies 40 A Curve C overcurrent protection and 30 mA Type A-SI or Type B EV residual-current protection, subject to applicable Australian installation requirements. Dynamic anti-tripping requires a compatible Schneider peak controller. Wiser Home can control and schedule charging around renewable-energy availability, but this is not standalone surplus-solar diversion built into the charger.

Key highlights

7.4 kW single-phase / 11 or 22 kW three-phase

Type 2 shuttered socket

IP55 / IK10

OCPP 1.6

Wi-Fi and Ethernet

Wiser Home control

Integrated 6 mA DC leakage protection

40 A Curve C overcurrent protection specified for 22 kW

30 mA Type A-SI or Type B EV upstream residual-current protection specified

Optional Schneider anti-tripping peak controller

352 x 244 x 117 mm

Current Australian retailers list 1-year warranty terms; confirm before purchase

Best for

Homes wanting one charger model configurable for single- or three-phase supply
Users wanting Wiser Home control
Installations requiring OCPP 1.6
Homes prepared to add compatible Schneider hardware for anti-tripping
Drivers who prefer an untethered Type 2 socket

Not ideal for

— Buyers wanting a tethered charging cable
— Solar households expecting standalone surplus-PV diversion built into the charger
— Homes expecting dynamic anti-tripping without additional Schneider monitoring hardware
— Buyers who do not want to confirm the applicable Australian warranty terms with the seller

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP55 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.4 kW single-phase / 11 or 22 kW three-phase

PhaseSingle- or three-phase

CableType 2 socket; charging cable separate

Weather ratingIP55 / IK10

Warranty1 year listed by current Australian retailers; confirm seller terms

Solar support—

OCPPYes

Load balancingOptional anti-tripping requires compatible Schneider peak-controller hardware

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.