Victron

EV Charging Station NS

Name: EV Charging Station NS
Brand: Victron
Price: 699 AUD
Availability: InStock

A Type 2 socket charger for Victron energy systems, with up to 22 kW three-phase charging and GX-based automatic surplus-solar control.

Estimated charger price

around $800

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Victron EV Charging Station NS supports up to 7.3 kW single-phase or 22 kW three-phase charging, with a configurable charging current of 6-32 A. It uses a Type 2 socket and is rated IP44, with a documented operating range of -25°C to 50°C. Manual and Scheduled charging modes can operate without a GX device. Automatic surplus-solar charging requires communication with a compatible Victron GX device, which supplies the charger with system energy data. Within an integrated Victron system, charging control can also respond to battery state of charge and inverter-overload conditions. An external RCD and external fuse or circuit breaker are required.

Key highlights

Up to 7.3 kW single-phase / 22 kW three-phase

6-32 A configurable charging current

Type 2 socket

IP44

-25°C to 50°C operating range

VictronConnect, Bluetooth and web-interface control

GX and VRM integration

Automatic surplus-solar charging with compatible GX system

MQTT and Modbus TCP

External RCD required

External fuse or circuit breaker up to 40 A required

5-year standard warranty

Best for

Homes already using a compatible Victron GX-based energy system
Off-grid or hybrid Victron systems requiring battery-aware EV charging
Single- or three-phase installations needing up to 22 kW capability
Users who prefer an untethered Type 2 socket

Not ideal for

— Homes wanting automatic surplus-solar charging without a compatible Victron GX device
— Buyers wanting a tethered charging cable
— Installations requiring OCPP backend connectivity
— Homes expecting standalone household load balancing independent of Victron system integration

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

The manufacturer lists an IP55 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.3 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

CableType 2 socket; charging cable separate

Weather ratingIP44

Warranty5 years

Solar supportSurplus solar

OCPP—

Load balancingAutomatic solar and overload control require compatible Victron GX integration

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.