Schneider

Schneider Charge Pro

Name: Schneider Charge Pro
Brand: Schneider
Price: 2600 AUD
Availability: InStock

A 7.4/11/22 kW tethered Schneider charger with OCPP 1.6J, Wi-Fi and Ethernet connectivity and support for external dynamic energy management.

Estimated charger price

around $2,600

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Schneider Charge Pro EVB4S22NC0 can be configured for 7.4 kW / 32 A single-phase, 11 kW / 16 A three-phase or 22 kW / 32 A three-phase charging. It has a 7 m tethered Type 2 cable, IP55/IK10 protection, Wi-Fi, two Ethernet interfaces and OCPP 1.6J. The charger includes integrated 6 mA DC residual-current detection. Site anti-tripping and dynamic energy management require compatible external Schneider control or metering hardware. The base EVB4S22NC0 does not include a 4G modem or MID meter. ISO 15118 upgradeability must not be presented as currently active Australian V2H or V2G capability.

Key highlights

7.4 kW single-phase / 11 or 22 kW three-phase

7 m tethered Type 2 cable

IP55 / IK10

-30°C to 50°C operating range

Wi-Fi and two Ethernet interfaces

OCPP 1.6J

Integrated 6 mA DC residual-current detection

External dynamic energy-management inputs

292 x 418 x 119 mm

No 4G modem or MID meter in the base model

Best for

Homes or managed sites wanting one charger for single- or three-phase supply
Installations requiring OCPP 1.6J
Sites using compatible Schneider dynamic energy-management equipment
Drivers wanting a 7 m tethered Type 2 cable

Not ideal for

— Solar households wanting standalone surplus-solar diversion built into the charger
— Homes expecting dynamic site load control without compatible external Schneider hardware
— Buyers expecting 4G or a MID meter in the base EVB4S22NC0
— Buyers interpreting ISO 15118 upgradeability as active V2H or V2G

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP55 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.4 kW single-phase / 11 or 22 kW three-phase

PhaseSingle- or three-phase

Cable7 m tethered Type 2

Weather ratingIP55 / IK10

WarrantyConfirm with seller

Solar support—

OCPPYes

Load balancingDynamic energy management requires compatible external Schneider control or metering

App controlConfirm with seller

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.